Solid State Power Supplies for Plastic Welding
Coaxial Power Systems Ltd are a manufacturer of Solid State and Hybrid RF Generators and associated equipment. Our experience gained over some 20
years is solely in 50Ω, crystal controlled, 13.56MHz plus frequency
technology. All our power supplies are CE approved and conform to IEC215,
EN50081-2 and EN50082-2 standards
With the greater emphasis being placed on Health and Safety in the work place, the time is rapidly approaching when outdated R.F. power supplies, many designed more than 40 years ago, will have to be replaced. Indeed there may be a cost saving by installing a modern, state of the art generator, with a 12 month warranty on parts and labour, instead putting up with increasingly common breakdowns and having to source out of date parts.
Coaxial Power Systems Ltd
offer three approaches to installing replacement power supplies:
Option 1: Install a completely freestanding power supply/matching network and control unit which links to your existing weld head with coaxial cables.
Option 2: Install the power supply/matching network inside the existing generator cavity space with the control panel on the machine facia.
Option 3: Install the matching network in the existing cavity space with the control panel on the machine fascia but have the generator in a remote location.
All types of installation have at least the following information on the control panel:
Forward Power
Reflected Power
Interlock Status
Tune Capacitor Position
>Load Capacitor Position
Line On/Off
Power Set
Ramp Time Set
Weld Counter
Weld Time Set
All power supplies up to 3kW are air-cooled. Generator ratings are the amount of power actually being put into the weld – not the input power to the power supply!
For further information, please contact us so that we can give you an exact specification for the power system to meet your needs.
(12.02.2001)